mc-Things

mc-Products => mc-Studio => Topic started by: sanikanatu on June 21, 2017, 04:56:46 pm

Title: mcStudio Connection Error
Post by: sanikanatu on June 21, 2017, 04:56:46 pm
When I start up McStudio it gives me the following error:


System.Net.Sockets.SocketException (0x80004005): A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond

How do I go about fixing this error?
Title: Re: mcStudio Connection Error
Post by: mc-T2 on June 27, 2017, 09:29:00 am
Hello!

This is a rare error and it can happen if the ports that mcStudio uses to communicate are not opened.

mcStudio requires ports 25452 for both UDP and TCP to work properly. This is how mcStudio talks to an mcGateway and the virtual gateway. These ports should be opened during installation of mcStudio however, depending on your network/security setup, these ports may not be opened or are closed after installation.
These ports do need to be opened to work with the application