Author Topic: mcGateway not found in mcStudio  (Read 213 times)


  • Newbie
  • *
  • Posts: 1
    • View Profile
mcGateway not found in mcStudio
« on: April 10, 2019, 09:17:24 am »

I am having trouble getting the mcGateway seen by the mcStudio IDE.  It can be found with the mcDongle and mcOTA updater and I can even ping the device with a successful return but the mcStudio just fails to see the mcGateway.  I only have even used beaconing but even that comes up empty.

I should note that I currently have it plugged into the network via CAT6 ethernet cable.

My specs are; mcGateway110
VM firmware version: 0v0.9r615
bootloader version: 1v1.0r0

mcStudio v0.9.534.0

mcOTA Updater v1.2.13

I see 3 lights, always on red, always on orange, steady blinking green.  When I updated the firmware, I made sure the USB had a max power consumption of 100mA, the green LED quickly blinked while the device reset (the User SW was held down during this) it blinked 3 times then was steady for a few moments before the returning to the steady blinking.

Thank you for your help.

Share on Facebook Share on Twitter