bergadr9din General5a1
Connecting the Gateway doesn't work
So far I did manage to upgrade the modules, also the gateway has been upgraded (both processors). Now the problem I have is to actually connect to the gateway, Lan and Wifi both connect and the amber LED is on when they are connected.
When I check in mcStudio – tools – devices no go, I can only see the virtual ones.
Not sure if I am doing something wrong ?
AdrieLike
veleek
veleek7d
I'm running into this same problem. At one point in time, I did manage to see my mcGateway in the list of gateways, but none of the mcModules were connected to it. I'm not sure if I need to do something to get the mcModules to connect to a specific gateway.Like
bergadr
bergadr7d
I would be happy if the Gateway would connect, but it doesn't (
I tried an other PC just to be sure but same result, no GWLike
mcJohn
mcJohnAdmin7da1
You have first to connect to the gateway and then devices are showing up. It is described better in the new msStudio user guide which will available for download this week. Our gateway guy can give you a better answer but he is not in yet. Still early hereLike
bergadr
bergadr6d
Thx John, just connecting the gateway is the problem as it doesn't showLike
2d
Good news! The latest update did fix my problem, I can see the Gateway and the modules )