Hello!
I've started evaluating the mc Things platform this morning and I've hit my first snag!
I was able to update firmware on the mc-modules and mc-gateway using the mc-dongle. Now I am trying to upload code to the mc-module.
When I open mc-Studio and select Tools -> Devices, I see my gateway appear in the list. When I select the gateway and press 'Connect' a connection doesn't initiate, so not modules appear in the bottom pane. I don't see any errors appearing in mc-studio or the application event viewer. I noticed there is a logging option under Tools -> Options -> Logging, but when I click the checkbox for 'Connect device' it becomes unchecked when I close the window. Are there any other error logs or event logs I could locate for troubleshooting? Or perhaps is there something wrong with my configuration?
I'm running:
- Two mc-Module 120 at v0.8-415
- One mc-Gateway 110 at Firmware V0.8-421 and Application Processor V0.6-367 (as far as I can tell, the application processor upgrade works, I'm unsure how to verify the version)
- mc-Studio v0.8.373.0
Other details or setups that might be relevant for you:
- Both the PC running mc-Studio and the Gateway are wired via ethernet. Both are attached to the same switch
- The gateway has a reserved IP address on our LAN
Just another thing I'm wondering - is there anything I need to do to confirm that a module has been connected to a gateway? Is it enough to simply power on the module next to the gateway or is there more to be done?
Let me know what I'm missing!