Author Topic: Cannot change the connection to another device in Run or Stopped mode?  (Read 676 times)

kbrooking

  • Full Member
  • ***
  • Posts: 104
    • View Profile
Oh Man!  :o  I would really appreciate your help John. I’ve been trying to figure this out for the past few days and unable to resolve the error message.  :'(

 Attached are the project files. I’m using Nick’s libraries for the MQTT and Temperature stuff.

I have tried using different length messages and topics but, same result. After about 6 or 7 iterations I get the "Cannot change the connection to another device in Run or Stopped mode." Error message.

This happens on all four of my 120 modules (with battery clips). I have the newest firmware for both the modules and GW and running the latest mc-studio.

Resetting the GW, trying various ways to connect the module via mc-studio and erasing via the dongle seem to have no effect. The code started out as a learning experience for the reed switch
But, I have since whittled away most of that code trying to track down what is causing the error. The best I have so far it that after a random number of Lplan.Publish’s that error pops up.