Author Topic: Cannot change the connection to another device in Run or Stopped mode?  (Read 674 times)

mc-John

  • Global Moderator
  • Full Member
  • *****
  • Posts: 212
    • View Profile
I was out of the office for 2 weeks but I am back and I actually looked into this today. The problem is that the device resets during publish. There are something like 10 things that can reset the device. It is also strange that other users don't have this problem. I need to talk to somebody else on the team to see how we can tackle this.
It could be something completely unrelated and I am going into the wrong direction and it is another error. We just have solved a large number of connection issues in our last release and you should try to install that. (mc-OTA, mc-Module and mc-Gateway host) If something goes wrong in the connection the system resets to so it is good to try it out.
Because the person I need to talk to is back next Tuesday, you should try the latest version and let me know if that solves the problem. If not than I will discuss the issue further with my college on Tuesday.

Nick_W

  • Full Member
  • ***
  • Posts: 215
    • View Profile
Interesting, I was having this same problem, but it only happens during debugging (at least you can only see the error then).

So I was just avoiding debugging, and accepting that we still get random reboots. I updated to the latest firmware yesterday, and while I haven't tried debugging yet, my modules are still publishing with no reboots so far.

The longest module has been publishing now for 1 day 7 hours without a reset - a new record!

I'll test the debugging tomorrow and see how it goes. I'm also testing the 120 module battery life, with high hopes.

kbrooking

  • Full Member
  • ***
  • Posts: 104
    • View Profile
Yep, I check for updates daily and make sure I'm always running the latest version of everything. I also noticed that with the latest 120 firmware and host processor it seems the modules are having a lot problems connecting. I don't recall having this problem prior to the new firmware release.