Just Got my MC Modules etc. and set up. Downloaded all the latest versions, and updated firmware. See screenshot.
Had all sorts of problems connecting to a test module with the gateway hard wired (Ethernet), but beacons showed OK. So I changed to WiFi and moved everything close together (hard wired Ethernet is in the basement, so I though distance may be a factor). RSSI was showing 177 (what units? not standard db units anyway).
Now I can connect (occasionally), so I modified the temperature example (which is incomplete by the way), and set MQTT publishing to my MQTT broker (mosquitto) every 1 minute. This sort of worked (ie it published every 5 minutes or so).
I added UID and uptime, and again it sort of worked. Downloaded to flash RAM, and now it doesn't work at all. Does not publish, and will not connect. Device is 000111BC.
Green LED flashes immediately followed by red LED every 5 seconds. Beacon updates, and I can see it in devices (see screenshot). I assume the module is resetting (hence red led flashes every 5 seconds), but I can't connect to try to reload the program/script.
I have tried another test module, and that sort of seems to work (works in "run" but when embedded publishes every so often - misses some - and uptime is always 0). I can connect to this module (000111C2).
How can I recover the module that refuses to connect? is there a "factory reset" procedure or something? I have re flashed the mcModule code via the OTA updater (that works) but still no luck connecting.
Is this module toast?