I have my gateway up and running. I have updated the firmware to 0.6.359
I open mc-studio.
It shows me my gateway with the appropriate firmware version.
I connect to the gateway.
mc-studio shows me the two modules it can see.
I see the modules sending beacon messages.
I click on a mc-module (i.e. highlight one) and then click on connect device, and it never connects.
I see beacons on the selected device for a while, after which they stop indefinitely.

I have tried to run the mcOTAUpdater to update module firmware, but it can never find the module
(after putting the Uid into the search box).

Can anyone suggest what I should do?

Further experimentation shows,
Stopping the connection, disconnecting the gateway and reconnecting will display the two modules I have active.
The one I haven't tried to connect to displays regular beacon updates.
The one I tried connecting to never shows beacon updates.

Taking the battery out and putting it back I see beacon updates from it again.
It appears to me that the mc-module has stopped or in an infinite loop after trying to connect to it.

Screen attached

[ Guests cannot view attachments ]

Did you power cycle the device? The module's bootloader will be active for 5 seconds after a power on reset. We can try it again by doing the following steps.
   1. Unplug power from mcMod110.
   2. Launch mc-OTA Updater and start “Search Device”. (without filtering)
   3. Supply power on mcMod110
   4. When the Device (mcMod110) is found, It’s info will be populated on the Device Information window and should be ready for starting the update.

For more information you can find the quick start guide here: http://www.mcthings.com/s/mcOTA-Quick-Start-Guide-005.pdf